RIGOL DG4000 Series - Manual (Page 228)

RIGOL Chapter 13 Specifications
DG4000 Series User’s Guide 13-6
Modulating Frequency 2mHz to 50KHz
[Mod/FSK/Trig] Input
Maximum Input Range
±2.5V
Input Bandwidth 5MHz
Input Impedance 1kΩ
Burst Characteristics
Carrier Waveform
Sine, Square, Ramp, Pulse, Noise, Arb (except DC)
Carrier Frequency 2mHz to 100MHz 2mHz to 100MHz 2mHz to 60MHz
Burst Count 1 to 1 000 000 or Infinite
Start/Stop Phase 0° to 360°
Internal Period 2μs to 500s
Gated Source External Trigger
Trigger Source Internal, External or Manual
Trigger Delay 0ns to 85s
Sweep Characteristics
Carrier Waveform
Sine, Square, Ramp, Arb (except DC)
Type Linear, Log or Step
Direction Up or Down
Start/Stop Frequency 1μHz to 160MHz 1μHz to 100MHz 1μHz to 60MHz
Sweep Time 1ms to 300s
Hold/Return Time 0ms to 300s
Trigger Source Internal, External or Manual
Mark Falling edge of Sync signal (programmable)
Counter Specifications
Function Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
Frequency Resolution 7 digits/second (Gate Time =1s)
Frequency Range 1μHz to 200MHz
Period Measurement Measurement Range 5ns to 16 days
Voltage Range and Sensitivity (Not modulation signal)
DC Coupling
DC Offset Range ±1.5VDC
Input
Attenuation:
“closed”
1μHz to 100MHz 50mVRMS to ±2.5Vac+dc
100MHz to 200MHz 100mVRMS to ±2.5Vac+dc
AC Coupling
1μHz to 100MHz 50mVRMS to ±2.5Vpp
100MHz to 200MHz 100mVRMS to ±2.5Vpp