RIGOL DG4000 Series User Manual
Page 217
DG4000 Series User’s Guide
11-9
2. To Control the Instrument through LAN
1) Connect the devices
Connect the generator to your LAN using network cable.
2) Configure LAN parameters
Set the LAN parameters of the generator according to the introductions in
To Configure the Remote Interface.
3) Search device resource
Start-up Ultra Sigma and click
, then click
in
the pop-up window, the software starts searching the generator
resources connected to LAN. Instrument resources searched will be
displayed in the right of the window. Select your desired resource and
click
, as shown in the following figures.