RIGOL DG4000 Series - Manual (Page 186)

RIGOL Chapter 10 Utility and System Settings
DG4000 Series User’s Guide 10-14
and 169.254.255.254 and subnet mask 255.255.0.0 automatically
according to the current network configuration.
 Press AutoIP to select “On” or “Off” to turn AutoIP mode on or off. To
enable this mode, set DHCP as “Off”.
3. ManualIP
 In ManualIP mode, the LAN parameters of the generator, e.g. IP address,
are defined by users.
 Press ManualIP to select “On” or “Off” to turn ManualIP mode on or off.
To enable this mode, set DHCP and AutoIP as “Off”.
 The IP address format is nnn.nnn.nnn.nnn. The first nnn ranges from 0 to
223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available IP from their network
administrator.
 Press IP Address and use the numeric keyboard and direction keys to
enter your desired IP. The setting is stored in non-volatile memory and
will be loaded automatically when the generator is powered on the next
time if DHCP and AutoIP are set as “Off”.
Tips
 If all the three IP configuration modes are “On”, the priority of
parameters configuration from high to low is “DHCP”, “AutoIP” and
“ManualIP”.
 The three IP configuration modes cannot be set as “Off” at the same
time.