Test/cal, Test/cal -25 – RIGOL DG4000 Series User Manual
Page 197
Chapter 10 Utility and System Settings
DG4000 Series User’s Guide
10-25
Test/Cal
Press Utility at the front panel, use
to select the 2/2 page menu and press
Test/Cal to open the Test/Cal interface. You can calibrate DG4000 manually after
inputing the correct calibration password.
1. Secure Code
Press this key and use the knob and direction keys to enter the correct
calibration password.
2. Secure
By default, this menu is “On”. It will be “Off” only when the correct calibration
password is entered.
3. CaliSelf
This menu is available after the correct calibration password is entered. You
can refer to the DG4000 Calibration Guide to calibrate the instrument
manually.
4. Preset
Press this softkey and the calibration values are restored to their default
values.
Note: manual calibration by users is not recommended. If calibration is required,
please contact
RIGOL customer service department or the local distributor.