RIGOL DG4000 Series - Manual (Page 164)

RIGOL Chapter 9 Store and Recall
DG4000 Series User’s Guide 9-2
Storage System Overview
DG4000 could store the current instrument state or user-defined arbitrary
waveform data in internal or external memory and recall them when needed.
DG4000 provides an internal non-volatile memory (C Disk) and an external
memory (D Disk).
 C Disk: provide 10 storage locations (STATE 1 to STATE 10) for state files and
10 storage locations (ARB 1 to ARB 10) for arbitrary waveform files. Users can
store instrument states and arbitrary waveform files (created by users or
downloaded using remote commands) to C Disk and copy the files in USB
storage device to C Disk.
 D Disk: available when USB storage device is detected at the USB Host
interface at the front panel.
Press Store (the key backlight goes on) at the front panel to enable the
Store/Recall function and open the Store/Recall interface as shown in the figure
below.
Figure 9-1 Store and Recall Interface