Epson PhotoPC 650 - Manual (Page 70)

4-18 Getting Photos Into Your Computer
Making an EPSON PhotoPC 650 Plug-In
Driver Alias (Macintosh)
1 Open the PictureWorks folder on your hard disk, then
open the HotShots folder within it.
2 Now open the Plug-ins folder and click the EPSON
PhotoPC 650 Plug-In icon.
3 Open the File menu and select Make Alias . An
EPSON PhotoPC 650 Plug-In alias icon is created.
4 Click and drag the Plug-In alias to your Macintosh
desktop.
5 Locate your application’s Plug-In folder. Then click and
drag the Plug-In alias from your desktop to the folder.
Opening EPSON PhotoPC 650 TWAIN or
Plug-In
1 Connect the camera to your computer using the serial
cable; see page 4-9 for instructions.
2 Start your application.
3 Windows: From the File menu, choose Import , then
Select TWAIN_32 Source (or Acquire , then
TWAIN Select Source ). Go to step 4.
Macintosh: From the File menu, select Import , then
select EPSON PhotoPC 650 Plug-in . Go to step 6.
4 Choose EPSON PhotoPC 650 TWAIN as the
TWAIN source, then click Select .
5 From the File menu, choose Import , then TWAIN_32
(or Acquire , then TWAIN Acquire ) .