Epson PhotoPC 650 - Manual (Page 17)

Getting Started 1-3
A
B
Installing Batteries
Before you install the four AA alkaline batteries that came
with your camera, make sure the camera is turned off (the
lens cover switch is in the off position, as shown to the left).
Then follow these steps:
1 Turn the camera upside down with the front of the
camera facing you.
2 Push the battery cover down and to the right. Then raise
the cover.
3 Insert all four batteries into the compartment,
positioning the + and – ends as shown:
4 Close the battery cover by sliding it to the left while
pressing it down until it snaps into place.
See the next page for important information about using
your batteries safely and efficiently.
+ end
– end