Epson PhotoPC 650 - Manual (Page 16)

1-2 Getting Started
Unpacking Your PhotoPC 650
Make sure you have all the parts shown on the previous page.
You won’t need the Macintosh adapter cable with a PC, or
the JumpShot USB cable, if you don’t have a Windows 98,
iMac, or Power Macintosh G3 system with compatible USB
support. However, you must install the USB CompactFlash
card to provide memory for your camera. It’s in the
envelope labelled “ATTENTION!”.
Installing the CompactFlash Card
Follow these steps to install the USB CompactFlash card:
1 Before you start, make sure the camera is turned off. The
lens cover switch should be in the off position.
2 Remove the USB CompactFlash card from the envelope
labelled “ATTENTION!”.
3 Open the camera’s card and port cover and insert the
card all the way into the slot, as shown below. Make sure
the card’s label faces the front of the camera.
4 Close the card and port cover.
EPSON
EPSON
lens cover switch
down: Off
CARD