Epson PhotoPC 650 User Manual
Page 43

Playing Back Pictures
3-7
A
B
Before you start, set the playback mode to
Multi
. This makes
it easier to select images; see page 3-4 for instructions.
Make sure the monitor switch is set to
PLAYBACK
, and
follow these steps to erase pictures:
1
Press the
SELECT
button to display the LCD monitor
menus.
2
Press the
or
button until you see the Photo
Control menu, then press the
SELECT
button to
display the menu options:
3
Press the
SELECT
button to enter Erase mode. The
Erase Photos menu is displayed:
4
Press the
or
button to choose
Select Photo
or
Erase All
.
◗
If you chose
Erase All
, press the
SELECT
button.
A message appears asking you to confirm that you
want to erase all the photos. Press the
SELECT
button to erase the photos; or press the
BACK
button to return to the Erase Photos menu without
erasing the photos.
◗
If you chose
Select Photo
, continue with step 5.
5
Press the
SELECT
button, then press the
or
button to move the white selection box to the photo you
want to erase.
6
Press the
SELECT
button. The selection box on the
image turns yellow. If you want to erase other photos at
the same time, use the
or
button to frame
them, then press the
SELECT
button to select them.
NOTE
To cancel the selection of a photo, press the SELECT button
again.
Photo Control
Erase
Lock
Reformat
Erase Photos
Select Photo
Erase All