Epson PhotoPC 650 User Manual

Page 20

1-6

Getting Started

NOTE
If you hear rapid beeps and see an error on the status display
panel on the top of the camera when you first turn it on, you
may not have installed the USB CompactFlash card or may
have installed it incorrectly. Follow the steps on page 1-2 to
install the card and try again. If you still get an error, see
Chapter 9 for troubleshooting information.

On the back of the camera, slide the monitor switch to

PLAYBACK

. You see a message asking you to set the

clock.

Press the

SELECT

button. You see the clock setting

display in the LCD monitor, with the month setting
highlighted in white:

If necessary, press the

button to increase the

number or the

button to decrease the number,

until the month is correct.

Press the

SELECT

button. The month setting is saved

and the day setting is highlighted.

Adjust the day, year, hour, and minute settings as
described above until the date and time are correctly
adjusted and saved.

After you finish setting the clock and press the

SELECT

button, your monitor returns to playback mode.

Slide the monitor switch to the

OFF

position.

monitor
switch

SELECT
button

Clock Setting

05/15/99

02:37

mm/dd/yy