Epson PhotoPC 650 - Manual (Page 26)

2-2 Taking Pictures
Turning the Camera On and Off
To turn on the camera, slide the lens cover switch to the ON
position, as shown in the illustration below. The lens cover
opens and the status display panel on the top of the camera
lights up. The status light on the back of the camera flashes
for a few seconds (if the LCD monitor switch is set to
PLAYBACK , set it to VIEW or OFF to take pictures). When
it turns green and stays on, you can take pictures.
To turn off the camera, slide down the lens cover switch to
the off position. The lens cover closes, and the status display
panel and status light turn off.
.
Saving Battery Power with Auto Shut-off
When the LCD monitor is turned off and you wait more
than 60 seconds before or after taking a picture, the camera
shuts off automatically to save battery power.
When the LCD monitor is on, the camera shuts off if you
wait more than 30 seconds before or after taking a picture.
To “wake” the camera after auto shut-off, press the SELECT
or BACK button on the back of the camera, or use the lens
cover switch to turn the camera off and on again.
Using the Status Display Panel
The status display panel shows the current camera settings
and the status of your battery power:
.
EPSON
EPSON
status display
panel
lens cover switch
down: OFF
lens cover switch
up: ON
timer
pictures
remaining
image quality
flash mode macro
mode
battery power
video mode
red eye
reduction flash