Epson PhotoPC 650 - Manual (Page 56)

4-4 Getting Photos Into Your Computer
Installing the Windows 98 USB
CompactFlash Card and USB Cable Drivers
The first time you connect the USB CompactFlash card and
JumpShot USB cable to your system, you need to install
their Windows 98 USB drivers using the plug-and-play
function. Follow these steps:
1 Make sure the USB CompactFlash card is inserted into
the JumpShot USB cable, and that the cable is
connected to your computer.
2 Turn on your computer (if it isn’t already turned on).
During plug-and-play installation, the light on the cable
turns on. (If it doesn’t turn on, see page 9-4 for
troubleshooting steps.)
3 You see the Add New Hardware Wizard that tells you
Windows 98 has detected new hardware on your system.
Click
Next .
4 You see the screen below. Click Search for the best
driver for your device . Then click Next .
click this option