Epson PhotoPC 650 - Manual (Page 108)

7-8 Editing Images
6 Select the location where the picture was taken, either
inside or outside .
7 Select the lighting conditions under which the photo
was taken. If you chose
inside , select with a flash ,
fluorescent lighting , shadows , or faded colors . If
you chose outside , select sunny day , cloudy day ,
some shadows , lots of shadows , or faded colors .
8 The effects of each selection in steps 5 through 7 are
shown in the
With Changes example in the SmartPix
window. Remember, you can layer changes over
previous changes—such as
sunny day and some
shadows —to get the effect you want.
9 If you don’t like the results, click Cancel Changes at
the bottom of the remote control.
To keep your changes and return to the main HotShots
window, click
Done . (You can still cancel your
SmartPix changes by selecting Undo from the Edit
menu.)
10 To save your edited picture, see page 6-3 for
instructions. Be sure to give your picture a new name, if
you want to save the original picture as it was.
Enhancing Pictures with Fix By
Example
HotShot’s Fix By Example feature lets you make a series of
corrections to a picture’s brightness, intensity, color tint, and
sharpness by selecting from on-screen examples.
Follow these steps to use Fix By Example:
1 Open the picture you want to edit. See page 6-2 for
instructions.
2 Click the Enhance button on the remote control to
open the Enhance menu.
Enhance button
Fix By Example
option