Yaskawa iQpump Drive User Manual - Manual (Page 73)

4.3 Pump System Start/Stop
YASKAWA TM.iQp.01 iQpump Drive User Manual 73
4.3 Pump System Start/Stop
◆ Pump Mode
Table 4.8 Pump Mode
The iQpump drive can control up to 3 pumps with one pump operating from the iQpump drive and the other two pumps being controlled
by the iQpump drive’s digital output contacts. The pump mode parameter P1-01 allows the user to select the number of pumps controlled
by the iQpump drive.
Parameter
No.
Modbus
Address
Parameter Name
Digital Operator
Display
Description
Setting
Range
Factory
Setting
Menu
Location
Page
No.
P1-01 0600H
Pump Mode
Pump Mode
Select type of control operation.
0: Drive Only (Simplex)
1: Drive + 1 Pump
2: Drive + 2 Pumps
0 to 2 0
Pump Quick
Setup
—