Yaskawa iQpump Drive User Manual - Manual (Page 133)

5.3 Pump Protection
YASKAWA TM.iQp.01 iQpump Drive User Manual 133
■
Sleep Function Based on Feedback Level (P2-01 = 2)
The iQpump Controller enters sleep mode when feedback signal rises above the level programmed in P2-02 for a time specified in P2-03.
When Pi operation direction ( B5-09 Output Level Selection ) is set for Reverse Output, sleep mode will check for the feedback signal to
fall below P2-02.
Figure 5.35
Figure 5.54 Sleep Function Based on Feedback Level
Sleep Delay Time
P2-03