Yaskawa iQpump Drive User Manual - Manual (Page 64)

3.7 Example of Changing a Parameter
64 YASKAWA TM.iQp.01 iQpump Drive User Manual
11 Press the SHIFT/RESET key to move the flashing digit to the right.
12 Press the INCREASE key to increase the set data.
13
Press the DATA/ENTER key to enter the set data. “Entry Accepted” is
displayed for 1.0 sec after the data setting has been confirmed.
14 The monitor display for C1-02 returns.
16 Press the MONITOR key on the HOA keypad to enter “Operation” menu.
Step Number Digital Operator Display Description
-ADV-
Decel Time 1
- - - - - - - - - - - - - - - - - - - -
C1-02= 00 3 0.0sec
(0.0~6000.0)
“30.0sec”
-ADV-
Decel Time 1
- - - - - - - - - - - - - - - - - - - -
C1-02= 00 4 0.0sec
(0.0~6000.0)
“30.0sec”
-ADV-
Entry Accepted
-ADV-
Decel Time 1
- - - - - - - - - - - - - - - - - - - -
C1- 02 = 30.0sec
(0.0~6000.0)
“30.0sec”
40.0 sec
U1-02 = 0.00Hz
U1-91 = 0.00PSI
-DRIVE- Rdy
Auto: Set-Point Ref
U1-01 = 0.0PSI