SMA SC 500CP-US-10 600V - Manual (Page 90)

13 Parameters SMA America, LLC
90 SCCP-US-BE-US_en-52 Operating Manual
13 Parameters
This section provides you with an overview of the parameters of all the components in the PV plant that you can display
and change via the user interface.
13.1 Sunny Central Inverter
13.1.1 Power Limitation
Name Description Value/range Explanation Default
value
Plimit* Nominal device power 0 kVA to 550 kVA SC 500CP-US-10 550 kVA
0 kVA to 550 kVA SC 500CP-US-10 600V 550 kVA
0 kVA to 700 kVA SC 630CP-US-10 700 kVA
0 kVA to 792 kVA SC 720CP-US-10 792 kVA
0 kVA to 825 kVA SC 750CP-US-10 825 kVA
0 kVA to 880 kVA SC 800CP-US-10 880 kVA
0 kVA to 935 kVA SC 850CP-US-10 935 kVA
0 kVA to 990 kVA SC 900CP-US-10 990 kVA
Pmax** Limitation of the nominal
power of the inverter
0 kW to 550 kW SC 500CP-US-10 550 kW
0 kW to 550 kW SC 500CP-US-10 600V 550 kW
0 kW to 700 kW SC 630CP-US-10 700 kW
0 kW to 792 kW SC 720CP-US-10 792 kW
0 kW to 825 kW SC 750CP-US-10 825 kW
0 kW to 880 kW SC 800CP-US-10 880 kW
0 kW to 935 kW SC 850CP-US-10 935 kW
0 kW to 990 kW SC 900CP-US-10 990 kW
P-WMod** Specification of the
procedure for active
power limitation
Off Limits active power to
Pmax
Off
WCtlCom Limits active power via an
external control unit
WCnst Limits active power in kW
via the P-W parameter
WCnstNom Manually limits the active
power in % (P-W) via
communication devices,
such as the SC-COM
WCnstNomAnIn Limits active power in % at
the analog input
WCnstNomDigIn Limits active power at the
digital input
This procedure is not
supported.