SMA SC 500CP-US-10 600V - Manual (Page 71)

SMA America, LLC 8 Reactive Power Control
Operating Manual SCCP-US-BE-US_en-52 71
To avoid mutual interference of several systems with this function, the parameter Q-VArTmsVtg can be used to set a
delay time. This delay time defines how long a voltage change must be pending before a change in reactive power
feed-in is triggered. Consequently, control of the line voltage at the grid connection point can be staggered across several
systems.
You can activate and deactivate the delay time by means of the parameter Q-EnaTmsVtg.
Parameters used
Q-VolWidNom
Q-VolNomP1
Q-VolNomP2
Q-VArGraNom
Q-VArTmsSpnt
Q-VArTmsVtg
Q-EnaTmsVtg