Copying system data to a string parameter, 1 0 str ing p a ra met e rs – HEIDENHAIN iTNC 530 (340 49x-04) User Manual
Page 640

640
11 Programming: Q Parameters
1
1
.1
0 Str
ing P
a
ra
met
e
rs
Copying system data to a string parameter
With the SYSSTR function you can copy system data to a string
parameter. At present only reading of the system time is available.
Select Q parameter functions.
Select STRING FORMULA function.
Enter the number of the string parameter in which the
TNC is to save the copied string. Confirm with the
ENT key.
Select the function for copying system data.
Enter the number of the system key (ID321 for the
system time) that you want to copy, and confirm with
the ENT key.
Enter the index of the system key from which to copy
the substring, and confirm with the ENT key. The
index specifies the date format when reading/
converting the system date (see description below).
Enter the array index of the system datum to be read
(no function yet–confirm with the NO ENT key).
Enter the number of the Q parameter from which the
TNC is to determine the date, if you previously read
the system time with FN18: SYSREAD ID320. If DAT is
not entered, the TNC determines the date from the
current system time.
Close the parenthetical expression with the ENT key
and confirm your entry with the END key.
This function is prepared for future expansions. The IDX
parameter has no function at present.