Reset the plane function – HEIDENHAIN iTNC 530 (340 49x-04) User Manual

Page 546

546

9 Programming: Special Functions

9.2 The PLANE F

unction: Tilting the W

ing Plane (Sof

ption

)

Reset the PLANE function



Show the soft-key row with special functions.



Select special TNC functions: Press the SPECIAL TNC

FUNCTIONS soft key.



Select the PLANE function: Press the TILT

MACHINING PLANE soft key: The TNC displays the
available definition possibilities in the soft-key row.



Select the Reset function. This internally resets the

PLANE

function, but does not change the current axis

positions.



Specify whether the TNC should automatically move

the rotary axes to the default setting (MOVE or TURN) or
not (STAY) (see “Automatic positioning: MOVE/
TURN/STAY (entry is mandatory)” on page 560).



To terminate entry, press the END key.

Example: NC block

25 PLANE RESET MOVE SET-UP50 F1000

The PLANE RESET function resets the current PLANE
function—or an active Cycle 19—completely (angles = 0
and function is inactive). It does not need to be defined
more than once.