7 programming: miscellaneous functions, Programming: miscellaneous functions – HEIDENHAIN iTNC 530 (340 49x-04) User Manual
Page 30
30
7.1 Entering Miscellaneous Functions M and STOP ..... 302
7.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant ..... 303
7.3 Miscellaneous Functions for Coordinate Data ..... 304
Programming machine-referenced coordinates: M91/M92 ..... 304
Activating the most recently entered datum: M104 ..... 306
Moving to positions in a non-tilted coordinate system with a tilted working plane: M130 ..... 306
7.4 Miscellaneous Functions for Contouring Behavior ..... 307
Smoothing corners: M90 ..... 307
Insert rounding arc between straight lines: M112 ..... 308
Do not include points when executing non-compensated line blocks: M124 ..... 308
Machining small contour steps: M97 ..... 309
Machining open contours: M98 ..... 311
Feed rate factor for plunging movements: M103 ..... 312
Feed rate in millimeters per spindle revolution: M136 ..... 313
Feed rate for circular arcs: M109/M110/M111 ..... 313
Calculating the radius-compensated path in advance (LOOK AHEAD): M120 ..... 314
Superimposing handwheel positioning during program run: M118 ..... 316
Retraction from the contour in the tool-axis direction: M140 ..... 317
Suppressing touch probe monitoring: M141 ..... 319
Delete modal program information: M142 ..... 320
Delete basic rotation: M143 ..... 320
Automatically retract tool from the contour at an NC stop: M148 ..... 321
Suppress limit switch message: M150 ..... 322
7.5 Miscellaneous Functions for Rotary Axes ..... 323
Feed rate in mm/min on rotary axes A, B, C: M116 (software option 1) ..... 323
Shorter-path traverse of rotary axes: M126 ..... 324
Reducing display of a rotary axis to a value less than 360°: M94 ..... 325
Exact stop at corners with nontangential transitions: M134 ..... 330