3 pattern definition pattern def, Function, Entering pattern def definitions – HEIDENHAIN iTNC 530 (340 49x-04) User Manual
Page 346

346
8 Programming: Cycles
8.3 P
a
tt
er
n Definition P
A
T
TERN DEF
8.3 Pattern Definition PATTERN DEF
Function
You use the PATTERN DEF function to easily define regular machining
patterns, which you can call with the CYCL CALL PAT function. As with
the cycle definitions, support graphics that illustrate the respective
input parameter are also available for pattern definitions.
The following machining patterns are available:
Entering PATTERN DEF definitions
Select the Programming and Editing operating mode.
Press the Special Functions key.
Select the functions for contour and point machining.
Open a PATTERN DEF block.
Select the desired machining pattern, e.g. a single
row.
Enter the required definitions, and confirm each entry
with the ENT key.
Machining pattern
Soft key
Page
POINT
Definition of up to any 9 machining
positions
ROW
Definition of a single row, straight or
arced
PATTERN
Definition of a single pattern, straight,
rotated or distorted
FRAME
Definition of a single frame, straight,
rotated or distorted
CIRCLE
Definition of a complete circle
CIRCULAR ARC
Definition of a circular arc