HEIDENHAIN iTNC 530 (340 49x-04) - Manual (Page 11)

HEIDENHAIN iTNC 530 11
TNC Model, Sof
tw
a
re
and F
eat
ur
es
New functions with 340 49x-02
„ DXF files can be opened directly on the TNC, in order to extract
contours into a plain-language program (see “Processing DXF Files
(Software Option)” on page 288)
„ 3-D line graphics are now available in the Programming and Editing
operating mode (see “3-D Line Graphics (FCL 2 Function)” on page
153)
„ The active tool-axis direction can now be set as the active machining
direction for manual operation (see “Setting the current tool-axis
direction as the active machining direction (FCL 2 function)” on page
96)
„ The machine manufacturer can now define any areas on the
machine for collision monitoring (see “Dynamic Collision Monitoring
(Software Option)” on page 97)
„ Instead of the spindle speed S you can now define the cutting speed
Vc in m/min (see “Calling tool data” on page 210)
„ The TNC can now display freely definable tables in the familiar table
view or as forms (see “Switching between table and form view” on
page 232)
„ The function for converting FK programs to H was expanded.
Programs can now also be output in linearized format (see
“Converting FK programs into HEIDENHAIN conversational format”
on page 272)
„ You can filter contours that were created using external
programming systems (see “Filtering Contours (FCL 2 Function)”
on page 574)
„ For contours which you connect via the contour formula, you can
now assign separate machining depths for each subcontour (see
“Defining contour descriptions” on page 487)
„ The single-processor version now supports not only pointing
devices (mice), but also USB block devices (memory sticks, disk
drives, hard disks, CD-ROM drives) (see “USB devices on the TNC
(FCL 2 function)” on page 137)