Amer Networks E5 CLI - Manual (Page 72)

Usage
selftest -memory [-num=]
Check the sanity of the RAM.
selftest -media [-size=]
Check the sanity of the disk drive.
selftest -mac
Check if there are MAC address collisions on the interfaces.
selftest -ping [-interfaces=]
Run a ping test over the interfaces.
selftest -throughput [-interfaces=]
Run a throughput test over the interfaces.
selftest -traffic [-interfaces=]
Run a traffic test over the interfaces.
selftest -cryptoaccel
Verify the correct functioning of the accelerator cards.
selftest -burnin [-hours[=]] [-minutes[=]]
[-memory] [-media] [-ping] [-throughput] [-traffic]
[-cryptoaccel]
Run burn-in tests for a set of sub tests. If no sub tests are specified the following are included:
-memory, -ping, -traffic, -cryptoaccel.
selftest -abort
Abort a running self test.
selftest
Show the status of a running test.
Options
-abort Abort a running self test.
-burnin Run burn-in tests for a selected set of sub tests.
-cryptoaccel Verify the correct functioning of available crypto
accelerator cards.
-hours[=] Test duration in hours. (Default: 48)
-interfaces= Ethernet interface(s).
-mac Check if there are MAC address collisions on the
interfaces.
Chapter 2: Command Reference
72