Amer Networks E5 CLI - Manual (Page 250)

3.108. RoutingRule
Description
A Routing Rule forces the use of a routing table in the forward and/or return direction of traffic
on a connection. The ordering parameter of the routing table determines if it is consulted before
or after the main routing table.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the rule. (Optional)
ForwardRoutingTable The forward routing table will be used for packets
from the connection originator to the connection
endpoint.
ReturnRoutingTable The return routing table will be used for packets
traveling in the reverse direction.
SourceNetwork Specifies the sender span of IP addresses to be
compared to the received packet.
DestinationNetwork Specifies the span of IP addresses to be compared
to the destination IP of the received packet.
SourceInterface Specifies the name of the receiving interface to be
compared to the received packet.
DestinationInterface Specifies the the destination interface to be
compared to the received packet.
Service Specifies a service that will be used as a filter
parameter when matching traffic with this rule.
Schedule By adding a schedule to a rule, the security
gateway will only allow that rule to trigger at those
designated times. (Optional)
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
Chapter 3: Configuration Reference
250