Logreceiversyslog, Logreceivermessageexception – Amer Networks E5 CLI User Manual
Page 210

3.80. LogReceiverSyslog
Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name
Specifies a symbolic name for the log receiver.
(Identifier)
IPAddress
Specifies the IP address of the log receiver.
Port
Specifies the port number of the log service.
(Default: 514)
Facility
Optional. If not configured, the IP address of the
sending interface will be sent as hostname.
(Default: local0)
Hostname
Specifies a unique hostname. (Optional)
RFC5424
Send Syslog messages according to RFC5424.
(Default: No)
LogSeverity
Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emergency,Alert,Critical,Error,Warning,Notice,Info)
RoutingTable
Specifies the routing table the clients host route
should be added to. (Default: main)
Comments
Text describing the current object. (Optional)
3.80.1. LogReceiverMessageException
The definitions here are the same as in Section 3.38.1, “LogReceiverMessageException” .
Chapter 3: Configuration Reference
210