Amer Networks E5 CLI User Manual
Page 224
precedence 7 (the highest precedence). (Optional)
LimitPPS7
Specifies
the
packet
per
second
limit
for
precedence 7 (the highest precedence). (Optional)
UserLimitKbpsTotal
Total bandwidth limit per group in the pipe in
kilobits per second. (Optional)
UserLimitPPSTotal
Total throughput limit per group in the pipe in
packets per second. (Optional)
UserLimitKbps0
Specifies the bandwidth limit per group in kbps for
precedence 0 (the lowest precedence). (Optional)
UserLimitPPS0
Specifies the throughput limit per group in PPS for
precedence 0 (the lowest precedence). (Optional)
UserLimitKbps1
Specifies the bandwidth limit per group in kbps for
precedence 1. (Optional)
UserLimitPPS1
Specifies the throughput limit per group in PPS for
precedence 1. (Optional)
UserLimitKbps2
Specifies the bandwidth limit per group in kbps for
precedence 2. (Optional)
UserLimitPPS2
Specifies the throughput limit per group in PPS for
precedence 2. (Optional)
UserLimitKbps3
Specifies the bandwidth limit per group in kbps for
precedence 3. (Optional)
UserLimitPPS3
Specifies the throughput limit per group in PPS for
precedence 3. (Optional)
UserLimitKbps4
Specifies the bandwidth limit per group in kbps for
precedence 4. (Optional)
UserLimitPPS4
Specifies the throughput limit per group in PPS for
precedence 4. (Optional)
UserLimitKbps5
Specifies the bandwidth limit per group in kbps for
precedence 5. (Optional)
UserLimitPPS5
Specifies the throughput limit per group in PPS for
precedence 5. (Optional)
UserLimitKbps6
Specifies the bandwidth limit per group in kbps for
precedence 6. (Optional)
UserLimitPPS6
Specifies the throughput limit per group in PPS for
precedence 6. (Optional)
UserLimitKbps7
Specifies the bandwidth limit per group in kbps for
precedence 7 (the highest precedence). (Optional)
UserLimitPPS7
Specifies the throughput limit per group in PPS for
precedence 7 (the highest precedence). (Optional)
Grouping
Grouping
enables
per-port/IP/network
static
bandwidth limits as well as dynamic balancing
between groups. (Default: None)
Chapter 3: Configuration Reference
224