Amer Networks E5 CLI - Manual (Page 202)

3.73. LinkAggregation
Description
A Link Aggregation interface combines multiple Ethernet interfaces into a single logical
endpoint.
Properties
Name Specifies a symbolic name for the interface.
(Identifier)
Members A set of Ethernet interfaces to aggregate.
(Optional)
DistributionAlgorithm Specifies how outgoing traffic will be distributed
among the active links.
Mode Specifies the method used to aggregate links.
(Default: Static)
LACPActivity Specifies if the system should actively attempt to
initiate LACP negotiations or wait for a partner
system to do so. (Default: Active)
LACPTimeout Specifies how soon the system will reselect active
links if a link is broken. (Default: Long)
LACPSystemPriority System priority value to be sent in LACP messages.
(Default: 1)
MACAddress The hardware address for the interface. (Optional)
IP The IP address of the interface.
Network The network of the interface.
DefaultGateway The default gateway of the interface. (Optional)
Broadcast The broadcast address of the connected network.
(Optional)
EnableIPv6 Enable processing of IPv6 traffic on this interface.
(Default: No)
IPv6IP The IP address of the interface.
IPv6Network The network of the interface.
IPv6DefaultGateway The default gateway of the interface. (Optional)
PrivateIP The private IP address of this high availability node.
(Optional)
NOCHB This will disable sending Cluster Heartbeats from
this interface (used by HA to detect if a node is
online and working). (Optional)
MTU Specifies the size (in bytes) of the largest packet
that can be passed onward. Must be 1294 or larger
Chapter 3: Configuration Reference
202