Amer Networks E5 CLI - Manual (Page 241)

3.102. RemoteMgmtSettings
Description
Setup and configure methods and permissions for remote management of this system.
Properties
NetconBiDirTimeout Specifies the amount of seconds to wait for the
administrator to log in before reverting to the
previous configuration. (Default: 30)
WebUIBeforeRules Enable HTTP(S) traffic to the security gateway
regardless of configured IP Rules. (Default: Yes)
WWWSrv_HTTPPort Specifies the HTTP port for the web user interface.
(Default: 80)
WWWSrv_HTTPSPort Specifies the HTTPS port for the web user interface.
(Default: 443)
WebUIAllowLoginAutoComplete Allow the web browser to remember the username
and password on the login page. (Default: Yes)
SSHBeforeRules Enable SSH traffic to the security gateway
regardless of configured IP Rules. (Default: Yes)
HTTPSCertificate Specifies host certificate to use for HTTPS traffic.
Only RSA certificates are supported. (Optional)
HTTPSRootCertificates Specifies eventual root certificates to use for HTTPS
traffic. (Optional)
NetconBeforeRules Enable netcon traffic to the security gateway
regardless of configured IP Rules. (Default: Yes)
NetConMaxChannels The maximum number of concurrent Netcon
channels. The Netcon channels consists of the
following: console, realtime logger, stat poll or
send/receive file context. (Default: 18)
SNMPBeforeRules Enable SNMP traffic to the security gateway
regardless of configured IP Rules. (Default: Yes)
SNMPRequestLimit Maximum number of SNMP packets that will be
processed each second. (Default: 100)
SNMPSysContact The contact person for this managed node.
(Default: N/A)
SNMPSysName The name for this managed node. (Default: N/A)
SNMPSysLocation The physical location of this node. (Default: N/A)
SNMPIfDescription What to display in the SNMP MIB-II ifDescr
variables. (Default: Name)
SNMPIfAlias What to display in the SNMP ifMIB ifAlias variables.
(Default: Hardware)
Chapter 3: Configuration Reference
241