beautypg.com

Multicastsettings – Amer Networks E5 CLI User Manual

Page 216

background image

3.85. MulticastSettings

Description

Advanced Multicast Settings.

Properties

AutoAddMulticastCoreRoute

Auto

generate

core

route

for

"224.0.0.1-239.255.255.255". (Default: Yes)

IGMPBeforeRules

Allows IGMP traffic to enter the Security Gateway
by default. (Default: Yes)

IGMPMaxGlobalRequestsPerSecond

Maximum

number

of

requests

per

second.

(Default: 1000)

IGMPMaxRequestsPerSecond

Maximum number of requests per interface per
second. (Default: 100)

IGMPReactToOwnQueries

The Security Gateway should always respond with
Member Reports, even to Queries originating from
itself. (Default: No)

IGMPRobustnessVariable

IGMP is robust to 'value' - 1 packet losses. (Default:
2)

IGMPQueryInterval

The interval (ms) between general queries sent by
the Security Gateway. (Default: 125000)

IGMPQueryResponseInterval

The maximum time (ms) until a host/client has to
send an answer to a query. (Default: 10000)

IGMPStartupQueryInterval

The general query interval (ms) to use during the
startup phase (default: 1/4 of the 'IGMP Query
Interval' parameter. (Default: 30000)

IGMPStartupQueryCount

The number of startup queries to send during the
startup phase. (Default: 2)

IGMPLastMemberQueryInterval

The maximum time (ms) until a host/client has to
send an answer to a group and group-and-source
specific query. (Default: 5000)

IGMPUnsolicatedReportInterval

The time between repetitions (ms) of an initial
membership report. (Default: 1000)

IGMPRouterVersion

Multiple IGMP querying routers on a network must
use the same IGMP version. (Default: IGMPv3)

IGMPLowestCompatibleVersion

Lowest

IGMP

compatibility

mode.

(Default:

IGMPv1)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

Chapter 3: Configuration Reference

216

This manual is related to the following products: