Amer Networks E5 CLI - Manual (Page 240)

3.101. RemoteMgmtNetcon
Description
Configure Netcon management to enable remote management to the system.
Properties
Name Specifies a symbolic name for the object. (Default:
NetconMgmt)
Interface Specifies the interface for which remote access is
granted.
Mode Configure, Console or Uptimepoll. (Default:
Configure)
IdleTimeout Number of seconds of inactivity until the Netcon
console user is automatically logged out. (Default:
900)
Key 64 byte Netcon PSK.
Network Specifies the network for which remote access is
granted.
Comments Text describing the current object. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
240