Amer Networks E5 CLI - Manual (Page 222)

Description
An aggregate is used to replace any number of smaller networks belonging to the local (intra)
area with one contiguous network which may then be advertised or hidden.
Properties
Network The aggregate network used to combine several
small routes.
Advertise Advertise the aggregate. (Default: Yes)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
3.87.1.4. OSPFVLink
Description
An area that does not have a direct connection to the backbone must have at least one area
border router with a virtual link to a backbone router, or to another router with a link to the
backbone.
Properties
Name Specifies a symbolic name for the virtual link.
(Identifier)
RouterID The ID of the router on the other side of the virtual
link.
UseDefaultAuth Use the authentication configuration specified in
the OSPF process. (Default: Yes)
AuthType Specifies the authentication type for the OSPF
protocol exchanges. (Default: None)
AuthPassphrase Specifies the passphrase used for authentication.
(Optional)
AuthMD5ID Specifies the MD5 key ID used for MD5 digest
authentication.
AuthMD5Key A 128-bit key used to produce the MD5 digest.
(Optional)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
222