Amer Networks E5 CLI - Manual (Page 148)

switch route is added automatically for this
interface. (Default: No)
AutoInterfaceNetworkRoute Automatically add a route for this interface using
the given network. (Default: Yes)
AutoDefaultGatewayRoute Automatically add a default route for this interface
using the given default gateway. (Default: Yes)
DHCPDNS1 IP of the primary DNS server. (Optional)
DHCPDNS2 IP of the secondary DNS server. (Optional)
DHCPPreferedIP Set a preferred IP address which will be included in
the request to the DHCP server. (Optional)
DHCPAllowStaticRoutes Allow the use of static routes send from the DHCP
server. (Default: No)
DHCPPreferedLeaseTime Set a preferred lease time which will be included in
the request to the DHCP server. (Optional)
DHCPLeaseFilter Allowed IP address range(s) for the DHCP lease.
(Optional)
DHCPServerFilter IP address range(s) for the DHCP servers from
which leases are accepted. (Optional)
DHCPDisallowIPConflicts Do not allow IP collisions with static routes.
(Default: Yes)
DHCPDisallowNetConflicts Do not allow network collisions with static routes.
(Default: Yes)
EnableRouterAdvertisement Enable Router Advertisement for this interface.
(Default: No)
MemberOfRoutingTable All or Specific. (Default: All)
RoutingTable Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
148