Amer Networks E5 CLI - Manual (Page 214)

3.84. MiscSettings
Description
Miscellaneous Settings
Properties
UDPSrcPort0 How to treat UDP packets with source port 0.
(Default: DropLog)
Port0 How to treat TCP/UDP packets with destination
port 0 and TCP packets with source port 0. (Default:
DropLog)
WatchdogTimerTime Number of non-responsive seconds before
watchdog is triggered (0=disable). (Default: 180)
BufFloodRebootTime How long to allow completely flooded buffers
before rebooting the Security Gateway. (Default:
3600)
ScrSave Screen saver selection. (Default: ScrSaveBlank)
StatusBar Status bar control. (Default: Auto)
ScrSaveTime Idle seconds before screen saver is automatically
activated (0=disable). (Default: 300)
HighBuffers_Dynamic Allocate the HighBuffers value dynamically.
(Default: Yes)
HighBuffers Number of packet buffers to allocate in addition to
the ~200 initial buffers. (Default: 1024)
LocalUndelivered How to treat (allowed) packets to the Security
Gateway that do not match open ports (snmp, scp,
netcon, etc). (Default: DropLog)
MaxPipeUsers Max number of concurrently tracked pipe users.
(Default: 1024)
Reassembly_MaxConnections Maximum percentage of the maximum allowed
connections
that data reassembly may be
performed on. (Default: 80)
Reassembly_MaxProcessingMem Maximum percentage of device memory that may
be used for processing data on reassembled
connections. (Default: 3)
WCFPerfLog Enables periodical logging of Web Contentent
Filtering resolving performance. (Default: Disabled)
AppCtl_FreeMemOptLevel Percentage level of free memory when the
Application Control subsystem will optimize its
memory usage and free up memory (0=disabled).
(Default: 5)
Chapter 3: Configuration Reference
214