Amer Networks E5 CLI - Manual (Page 267)

3.119. SSLVPNInterface
Description
An SSL VPN interface, together with the bundled client, creates an easy to use tunnel solution for
roaming users.
Properties
Name Specifies a symbolic name for the interface.
(Identifier)
OuterInterface The physical interface that the SSL VPN interface
will listen on.
ServerPort The listening port for the SSL VPN interface.
(Default: 443)
ServerIP Listening IP for the SSL VPN interface.
ServerFQDN Optional. FQDN of the SSL VPN server given to
clients, eg: (sslvpn.example.com). (Optional)
IPAddressPool A range, group or network that will be the IP pool
from which the SSL VPN clients will receive their IP
addresses.
InnerIP Local IP for the SSL VPN interface.
PrimaryDNS IP of the primary DNS Server. (Optional)
SecondaryDNS IP of the seconday DNS Server. (Optional)
Routing Describes how the traffic from the client should be
routed. (Default: All-Nets)
ClientRoutes Networks to be routed through the SSL VPN tunnel
in the client.
MemberOfRoutingTable All or Specific. (Default: All)
RoutingTable Specifies the PBR table to insert the interface IP
route into. It also means that the specified routing
table will be used for all routing lookups, unless
overridden by a PBR rule. (Default: main)
ProxyARPAllInterfaces Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
ProxyARPInterfaces Specifies the interfaces on which the security
gateway should publish routes via Proxy ARP.
(Optional)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
267