Igmpsetting – Amer Networks E5 CLI User Manual
Page 169
3.52. IGMPSetting
Description
IGMP parameters can be tuned for one, or a group of interfaces in order to match the
characteristics of a network.
Properties
Name
Specifies
a
symbolic
name
for
the
object.
(Identifier)
Interface
The interfaces that these settings should apply to.
RobustnessVariable
IGMP is robust to (Robustness Variable - 1) packet
losses. (Default: 2)
MaxRequestsPerSecond
Maximum number of IGMP requests to process
each second and interface. (Default: 100)
RouterVersion
Multiple IGMP querying routers on a network must
use the same IGMP version. (Default: IGMPv3)
LowestCompatibleVersion
The lowest IGMP version to allow on incoming
requests. (Default: IGMPv1)
QueryInterval
The interval between general queries sent by the
security gateway. (Default: 125000)
QueryResponseInterval
The maximum time until a host (client) has to send
an answer to a query. (Default: 10000)
LastMemberQueryInterval
The maximum time until a host (client) has to send
an answer to a group and group-and-source
specific query. (Default: 10000)
LastMemberQueryCount
The number of group and group-and-source
specific queries sent until the security gateway
decides there are no more subscribers to a specific
multicast group. (Default: 2)
StartupQueryInterval
The general query interval to use during the
startup phase. (Default: 30000)
StartupQueryCount
The number of startup queries to send during the
startup phase. (Default: 2)
UnsolicatedReportInterval
The time between repetitions of a host's initial
membership reports to a group. (Default: 1000)
ReactToOwnQueries
Should the system respond to Member Report
Queries orginating from itself. (Default: No)
Comments
Text describing the current object. (Optional)
Chapter 3: Configuration Reference
169