Natpool – Amer Networks E5 CLI User Manual
Page 217
3.86. NATPool
Description
A NAT Pool is used for NATing multiple concurrent connections to using different source IP
addresses.
Properties
Name
Specifies a symbolic name for the NAT Pool.
(Identifier)
Type
Specifies how NAT'ed connections are assigned a
NAT IP address. (Default: stateful)
IPSource
Specify which IP Address source to use. (Default:
IPRange)
IPPool
Specifies the IP Pool used for retrieving IP
addresses for NAT translation.
IPPoolIPs
The number of IP addresses to get from the IP Pool.
IPRange
Specifies the range of IP addresses used for NAT
translation.
StateKeepAlive
The number of seconds that stateful NAT state will
be kept in absence of new connections. (Default:
120)
MaxStates
Maximum number of statefully tracked NATPool
states. (Default: 16384)
ProxyARPAllInterfaces
Always select all interfaces, including new ones, for
publishing routes needed for receiving traffic on
NATPool addresses. (Default: No)
ProxyARPInterfaces
Specifies the interface/interfaces on which the
security gateway should publish routes needed for
the relay via Proxy ARP. (Optional)
Comments
Text describing the current object. (Optional)
Chapter 3: Configuration Reference
217