Amer Networks E5 CLI - Manual (Page 281)

3.129. VLAN
Description
Use a VLAN to define a virtual interface compatible with the IEEE 802.1Q Virtual LAN standard.
Properties
Name Specifies a symbolic name for the interface.
(Identifier)
Ethernet Specifies on which Ethernet interface the virtual
LAN is defined.
VLANID Specifies the virtual LAN ID used for this virtual
LAN interface. Two virtual LANs cannot have the
same VLAN ID if they are defined on the same
Ethernet interface. (Default: 0)
IP Specifies the IP address of the virtual LAN interface,
if other than the IP of the Ethernet interface.
Network Specifies the network address of the virtual LAN
interface.
DefaultGateway The default gateway of the virtual LAN interface.
(Optional)
Broadcast Specifies the broadcast address of the virtual LAN
interface. (Optional)
EnableIPv6 Enable processing of IPv6 traffic on this interface.
(Default: No)
IPv6IP Specifies the IP address of the virtual LAN interface.
IPv6Network Specifies the network of the virtual LAN interface.
IPv6DefaultGateway The default gateway of the virtual LAN interface.
(Optional)
PrivateIP The private IP address of this high availability node.
(Optional)
Metric Specifies the metric for the auto-created route.
(Default: 100)
AutoSwitchRoute Enable transparent mode, which means that a
switch route is added automatically for this virtual
LAN interface. (Default: No)
AutoInterfaceNetworkRoute Automatically add a route for this virtual LAN
interface using the given network. (Default: Yes)
AutoDefaultGatewayRoute Automatically add a default route for this virtual
LAN interface using the given default gateway.
(Default: Yes)
PrioCopyPolicy Set the QoS to VLAN priority copy policy. (Default:
InheritFromPhys)
Chapter 3: Configuration Reference
281