Amer Networks E5 CLI - Manual (Page 254)

MonitorGateway Mark the route as down if the next hop does not
answer on ARP lookups during a specified time.
(Default: No)
MonitorGatewayManualARP Enable a manually specified ARP lookup interval.
(Default: No)
MonitorGatewayARPInterval Specifies the ARP lookup interval in milliseconds.
(Default: 1000)
EnableHostMonitoring Enables the Host Monitoring functionality.
(Default: No)
Reachability Specifies the number of hosts that are required to
be reachable to consider the route to be active.
(Default: ALL)
GracePeriod Specifies the time to wait after a reconfiguration
until the monitoring begins. (Default: 5)
ReachabilityCount Minimum number of reachable hosts to consider
the route to be active.
Metric Specifies the metric for this route. (Default: 100)
ProxyARPAllInterfaces Always select all interfaces, including new ones, for
publishing routes via Proxy ARP. (Default: No)
ProxyARPInterfaces Specifies the interfaces on which the security
gateway should publish routes via Proxy ARP.
(Optional)
Comments Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be placed
last in the list and the Index will be equal to the length of the list.
3.110.1.1. MonitoredHost
Description
Specify a host and a monitoring method.
Properties
Method Monitoring method. (Default: ICMP)
IPAddress Specifies the IP address of the host to monitor.
Port Specifies the TCP port to monitor.
PollingInterval Delay in milliseconds between each monitor
attempt. (Default: 10000)
ReachabilityRequired Specifies if this host is required to be reachable for
Chapter 3: Configuration Reference
254