Configmodepool – Amer Networks E5 CLI User Manual
Page 122

3.16. ConfigModePool
Description
An IKE Config Mode Pool will dynamically assign the IP address, DNS server, WINS server etc. to
the VPN client connecting to this gateway.
Properties
IPPoolType
Specifies whether a predefined IP Pool or a static
set of IP addresses should be used as IP address
source.
IPPool
Specifies the IP pool to use for assigning IP
addresses to VPN clients.
IPPoolAddress
Specifies the set of IP addresses to use for
assigning IP addresses to VPN clients.
IPPoolNetmask
Specifies the netmask to assign to VPN clients.
DNS
Specifies the IP address of a DNS server that a VPN
client should be able to connect to. (Optional)
NBNSIP
Specifies the IP address of a NBNS/WINS server that
a VPN client should be able to connect to.
(Optional)
DHCP
Specifies the IP address of a DHCP that that a VPN
client should be able to connect to. (Optional)
Subnets
Specifies additional subnets behind this gateway.
(Optional)
Comments
Text describing the current object. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
122