Amer Networks E5 CLI - Manual (Page 175)

3.56. IPPool
Description
An IP Pool is a dynamic object which consists of IP leases that are fetched from a DHCP Server.
The IP Pool is used as an address source by subsystems that may need to distribute addresses,
e.g. by IPsec in Configuration mode.
Properties
Name Specifies a symbolic name for the IP Pool.
(Identifier)
DHCPServerType Should server address be specified or should
broadcast on a interface be used. (Default:
Interface)
ServerIP DHCP Server Address.
ServerFilter Specifies which DHCP server that leases should be
accepted from. (Optional)
Interface Specifies the interface which has the DHCP server
that leases are accepted from.
IPFilter Specifies which IP addresses that are accepted
from the DHCP server. (Optional)
ReceiveInterface Which interface to use when communicating with
the DHCP server. (Optional)
PrefetchLeases Specifies the number of leases an IP Pool will keep
prefetched. (Default: 3)
MaxFree Maximum number of free address that the IP pool
will keep, others will be returned back to DCHP
server. (Optional)
MaxClients Maximum number clients that the IP pool is
allowed to contain. (Optional)
MacRangeStart Specifies the lower boundary of MAC addresses
that DCHP Clients will use in communication with a
server. (Optional)
MacRangeEnd Specifies the upper boundary of MAC addresses
that DCHP Clients will use in communication with a
server. (Optional)
SenderIP The local IP that should be used when
communication with the DHCP server. (Optional)
AscendingFreeList Enabling this will result in the IPs being fetched in a
predictable manner from the free list. (Default: No)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
175