Amer Networks E5 CLI - Manual (Page 63)

-verbose Increase amount of information to display.
OSPF enabled interface.
OSPF enabled interface.
LSA ID.
OSPF Area.
Neighbor.
{HA | ALT} Show HA routingtable.
2.2.56. pcapdump
Packet capturing.
Description
Packet capture engine
Usage
pcapdump
Show capture status.
pcapdump -start [] [-size=] [-snaplen=]
[-count=] [-out] [-out-nocap]
[-eth=] [-ethsrc=]
[-ethdest=] [-ip=]
[-ipsrc=] [-ipdest=]
[-port=<0...65535>] [-srcport=<0...65535>]
[-destport=<0...65535>] [-proto=<0...255>] [-icmp] [-tcp]
[-udp] [-promisc] [-ipversion=<1...15>]
Start capture.
pcapdump -stop []
Stop capture.
pcapdump -status
Show capture status.
pcapdump -show []
Show a captured packets brief.
pcapdump -write [] [-filename=]
Write the captured packets to disk.
pcapdump -wipe
Remove all captured packets from memory.
Chapter 2: Command Reference
63