Routingtable, Route – Amer Networks E5 CLI User Manual
Page 253
3.110. RoutingTable
Description
The system has a predefined main routing table. Alternate routing tables can be defined by the
user.
Properties
Name
Specifies a symbolic name for the routing table.
(Identifier)
Ordering
Specifies how a route lookup is done in a named
routing table. (Default: Only)
RemoveInterfaceIPRoutes
Removes the interface routes. Makes the security
gateway completely transparent. (Default: No)
Comments
Text describing the current object. (Optional)
3.110.1. Route
Description
A route defines what interface and gateway to use in order to reach a specified network.
Properties
Name
Specifies
a
symbolic
name
for
the
object.
(Optional)
Interface
Specifies which interface packets destined for this
route shall be sent through.
Gateway
Specifies the IP address of the next router hop used
to reach the destination network. If the network is
directly
connected
to
the
security
gateway
interface,
no
gateway
address
is
specified.
(Optional)
LocalIP
The IP address specified here will be automatically
published on the corresponding interface. This
address will also be used as the sender address in
ARP queries. If no address is specified, the security
gateway's interface IP address will be used.
(Optional)
Network
Specifies the network address for this route.
RouteMonitor
Specifies if this route should be monitored for
route changes for route failover purposes. (Default:
No)
MonitorLinkStatus
Mark the route as down if the interface link status
changes to down. (Default: No)
Chapter 3: Configuration Reference
253