Amer Networks E5 CLI - Manual (Page 114)

AdvReachableTime The value to be placed in the Reachable Time field
in the Router Advertisement messages SGW. The
value zero means unspecified. (Default: 0s).
(Default: 0)
AdvRetransTimer The value to be placed in the Retrans Timer field in
the Router Advertisement messages sent by the
SGW. The value zero means unspecified. (Default:
0s). (Default: 0)
AdvManagedFlag Indicates that addresses are available via DHCPv6.
(Default: False). (Default: No)
AdvOtherConfigFlag Indicates that other configuration information is
available via DHCPv6. (Default: False). (Default: No)
AdvCurHopLimit The default value to be placed in the Cur Hop Limit
field in the Router Advertisement messages sent
by the SGW. The value zero means unspecified.
(Default: 64). (Default: 64)
AdvLinkMTU The value to be placed in MTU options sent. A
value of zero indicates that no MTU options are
sent. (Default: 0). (Default: 0)
AdvValidLifetime The value to be placed in the Valid Lifetime in the
Prefix Information option. The value of 999999999
represents infinity. (Default: 2592000s). (Default:
2592000)
AdvPreferredLifetime The value to be placed in the Preferred Lifetime in
the Prefix Information option. The value of
999999999 represents infinity. (Default: 604800s).
(Default: 604800)
AdvOnLinkFlag Indicates that the advertised prefix can be used for
on-link determination. (Default: True). (Default:
Yes)
AdvAutonomousFlag Indicates that the advertised prefix can be used for
stateless address configuration. (Default: True).
(Default: Yes)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
114