Routeradvertisement – Amer Networks E5 CLI User Manual
Page 248
3.107. RouterAdvertisement
Description
Enabling Router Advertisement will answer Solicitations and periodically send out
Advertisements. Stateless address autoconfiguration (SLAAC) will only work correctly if the
configured network prefix is 64 (RFC4862).
Properties
Index
The index of the object, starting at 1. (Identifier)
Name
Specifies
a
symbolic
name
for
the
Router
Advertisement.
Interface
Specifies the name of the interface to advertise on.
AdvUseGlobal
Use global RA advanced settings. (Default: Yes)
MaxRtrAdvInterval
Maximum time between sending unsolicited
multicast Router Advertisement. (Default: 600s).
(Default: 600)
MinRtrAdvInterval
Minimum
time
between
sending
unsolicited
multicast
Router
Advertisement.
Will
be
automatically adjusted if set to less than 3 seconds
or greater than .75 * MaxRtrInterval). (Default: 200)
AutoLifetime
Auto adjust the Router Lifetime field using the
following formula; 3 * MaxRtrAdvInterval. (Default:
Yes)
AdvDefaultLifetime
The value to be placed in the Router Lifetime field
of Router Advertisements sent from the SGW, in
seconds. (Default: 1800s). (Default: 1800)
AdvReachableTime
The value to be placed in the Reachable Time field
in the Router Advertisement messages SGW. The
value zero means unspecified. (Default: 0s).
(Default: 0)
AdvRetransTimer
The value to be placed in the Retrans Timer field in
the Router Advertisement messages sent by the
SGW. The value zero means unspecified. (Default:
0s). (Default: 0)
AdvManagedFlag
Indicates that addresses are available via DHCPv6.
(Default: False). (Default: No)
AdvOtherConfigFlag
Indicates that other configuration information is
available via DHCPv6. (Default: False). (Default: No)
AdvCurHopLimit
The default value to be placed in the Cur Hop Limit
field in the Router Advertisement messages sent
by the SGW. The value zero means unspecified.
(Default: 64). (Default: 64)
AdvLinkMTU
The value to be placed in MTU options sent. A
value of zero indicates that no MTU options are
Chapter 3: Configuration Reference
248