Amer Networks E5 CLI - Manual (Page 134)

3.25. DHCPv6Server
Description
A DHCPv6 Server determines a set of IPv6 addresses and host configuration parameters to hand
out to DHCPv6 clients attached to a given interface.
Properties
Index The index of the object, starting at 1. (Identifier)
Name Specifies a symbolic name for the DHCPv6 Server
rule. (Identifier)
Interface The source interface to listen for DHCPv6 requests
on. This can be a single interface or a group of
interfaces.
IPv6AddressPool A range, group or network that the DHCP Server
will use as IPv6 address pool to give out DHCPv6
leases from.
Domain Domain name used for DNS resolution. (Optional)
ValidLeaseTime The length of time in seconds that an address
remains valid for sending and receiving packets.
When expired, the host is not allowed to use the
provided address any more and should acquire a
new one. (Default: 86400)
PreferredLeaseTime The length of time in seconds that an address
should
be preferred to be used in new
communications. When expired, unless renewed,
the address becomes deprecated and should no
longer be used as a source address in new
communications. (Default: 66400)
DNS1 IPv6 of the primary DNS server. (Optional)
DNS2 IPv6 of the secondary DNS server. (Optional)
SendUnicastOption Enable sending of Unicast option to DHCPv6 client.
(Default: No)
RapidCommit Enable respond with committed address
assignments and other resources on Solicit
request. (Default: No)
PreferenceConfigured Enable Preference option sending in Advertise
message. (Default: No)
PreferenceValue Preference Option value. (Default: 0)
LogEnabled Enable logging. (Default: Yes)
LogSeverity Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments Text describing the current object. (Optional)
Chapter 3: Configuration Reference
134