Welltech Dialogic SS7 Protocols ISUP - Manual (Page 73)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
73
The following optional parameters are supported in ANSI mode:
• Network termination
6.6.26 Resume Indication
This primitive is used by ISUP to indicate that a call that had been suspended
is now resuming.
Message type
RES (Resume Message)
Mandatory parameters
• Suspend/resume indicators
Optional parameters
• Call reference
6.6.27 Segmentation Indication
Note: This message is only applicable to ITU-T operation
This primitive contains the second segment of an ISUP message.
Message type
SGM (Segmentation Message)
Mandatory parameters
None
Optional parameters
• Access transport
• User-to-user information
• Message compatibility information
• Generic digit
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).
• Generic notification
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).
• Generic number
This parameter may be repeated (see Appendix E: ISUP Repeat
Parameters on page 197 ).