Welltech Dialogic SS7 Protocols ISUP - Manual (Page 173)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
173
Parameter Value
UK ISUP API
Length Parameter
Name
Hex Dec Hex Dec
Mandatory/
Optional
Parameter
Min Max
Message
used
Comments
indicators indicator(CBI) and
the Network
translated address
indicator on bit 2.
Partial calling
line ID 0xfb 251 0xfb 251 Optional 9 9 IAM
UK national
forward call
indicators (link-
by-link) 0xf4 244 0x1f4 500 Optional 1 2 IAM
A.3 Japan (TTC) ISUP
Japan (TTC) ISUP Specification: JT-Q761-JT-Q764 and JT-Q850
Configuration and options
In order to use this feature, ISPGVAR_TTC must be set in the ‘variant’ field in
the Configure Circuit Group Request message (see Section ) 8.2 on page 126 .
For Japanese (TTC) ISUP, set the circuit group options as recommended for
the ‘ITU’ variant (refer to
Appendix D: ISUP Configuration Option Settings on
page 193 ). In addition to these suggested option settings, the ISPF_PC_SIZE
module option (bit 11 in the ‘options’ field) and the ISPX1GOP_16PC circuit
group option (bit 1 in the ‘more extended options’ field) must also be set.
Parameters
When this variant is selected, the following Japanese (TTC) ISUP specific
parameters may be used:
Parameter Value
Japan (TTC)
ISUP
API
Length Parameter Name
Hex Dec Hex Dec
Mandatory/
Optional
Parameter
Min Max
Message
used
Comments
Additional party's
category 0xf3 243 0xf3 243 Optional 2 254 ACM, ANM,
CPG, IAM
Carrier information
transfer 0xf1 241 0xf1 241 Optional 2 255 ACM, CPG,
IAM
Cause of no ID 0xf5 245 0xf5 245 Optional 1 1 IAM
Charge area
information 0xfd 253 0x1fd 509 Optional 1 255 ACM, ANM,
CPG, IAM
Charge
information 0xfb 251 0xca 202 Optional 1 255 ACM, CPG
Charge
information delay 0xf2 242 0xf2 242 Optional 1 255 ACM, CPG
Charge
information type 0xfa 250 0xe4 228 Optional 1 1 ACM, CPG