Welltech Dialogic SS7 Protocols ISUP - Manual (Page 117)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
117
Parameters
gid
The group identifier for the Circuit Group.
ptype
The type of management primitive taken from the following table:
Value Name Function
0 Reset Circuit(s) reset
2 M-Block Circuit(s) maintenance blocked
3 M-Unblock Circuit(s) maintenance unblocked
5 H-Block Circuit(s) hardware blocked.
6 H-Unblock Circuit(s) hardware unblocked
12 Available The destination point code (signalilng point) for the circuits in
this group is now available.
13 Unavailable The destination point code (signalling point) for the circuits in
this group has become temporarily unavailable.
cic_mask
A 32 bit mask indicating to which of the circuits in the circuit group the
message applies.
7.5 Circuit Group Supervision Status Indication
This message is issued by ISUP to indicate completion of a circuit group query
function requested by the user and contains the circuit state for the
requested circuits as provided by the remote signaling point.
Message Header
structure MSG
type ISP_MSG_CGSS_IND (0x070c)
id gid
src ISUP module ID
dst Management module ID
rsp_req 0x00
hclass 0x00
status 0x00
err_info 0x00
len 38