Welltech Dialogic SS7 Protocols ISUP - Manual (Page 55)

Dialogic ® SS7 Protocols ISUP Programmer's Manual Issue 15
55
Value Primitive Message
type
Dec Hex
Use
Network resource
management
indication NRM 50 0x32 Indicates that network resources
associated have been modified.
Overload indication OLM 48 0x30 Indicates that remote switch is in
overload.
Proceeding indication ACM 6 0x06 Indicates outgoing called party number
is complete.
Progress indication CPG 44 0x2c Carries progress information.
Pre-release
information indication PRI 66 0x42 Indicates that end-to-end information
has been requested.
Release indication REL 12 0x0c Initiates call clearing.
Release confirmation RLC 16 0x10 Indicates that circuit has returned to
IDLE state and is available for re-
selection.
Request information
indication INR 3 0x03 Indicates a request for additional call
information.
Resume indication RES 14 0x0e Call resumed indication.
Segmentation
indication SGM 56 0x38 Conveys an additional message
segment.
Suspend indication SUS 13 0x0d Call suspended indication.
Setup confirmation ANM
CON
9
7
0x09
0x07
Outgoing call answered indication.
Setup indication IAM 1 0x01 Incoming call indication.
Subsequent Directory
Number SDM 67 0x43 Subsequent directory number digits for
overlap signaling
Unrecognised
message indication UMT 254 0xfe Conveys a received message with
unrecognized message type to the
user.
User information
indication USR 45 0x2d Conveys received user to user data.